快三怎么玩大小单双稳赚-快三怎么推算和值大小单双-玩快三大小单双稳赚技巧

快三怎么玩大小单双稳赚-快三怎么推算和值大小单双-玩快三大小单双稳赚技巧7*24Hours for you

15967710202/0577-66081118

company newsCurrent Pocation:homecompany news

快三怎么玩大小单双稳赚-快三怎么推算和值大小单双-玩快三大小单双稳赚技巧The viscoelasticity of polyurethane foaming machine

The change of viscoelasticity of polyurethane foaming machine during foaming


During the foaming process of the polyurethane foaming machine, the reaction system starts from the liquid, and finally forms high elastic polymer through foaming and gel reaction. The change of viscoelasticity of the foam system is very important for the stability of foam formation.


快三怎么玩大小单双稳赚-快三怎么推算和值大小单双-玩快三大小单双稳赚技巧At the late stage of foam expansion, the gas pressure in the bubble reaches the maximum value with the progress of the reaction and the increase of the temperature inside the bubble. At this time, with the speeding up of the gel reaction velocity, bubble wall on the membranes of the polymer viscosity increases, and the elastic is not high, at this moment cannot bear because of the increase of gas pressure, and cause the wall film stretching, bubble wall membrane was broken, gas escaping from the broken, the hole forming bubbles, burst bubble wall polymer membranes, suffer the effect of surface tension, flow to the foam reinforced column, the reinforced column strengthened. If the degree of polymerization of the foam rib column at this time, the bubble wall membrane is not easy to be burst by the gas in the bubble, thus forming a closed-hole structure. When more than 10% of the bubbles in the soft foam system of polyurethane foaming machine are of closed-hole structure, carbon dioxide gas is easy to penetrate through the bubble wall membrane, while air is difficult to penetrate. As a result, after the reaction system cools, the obturator bubbles are deflated by external atmospheric pressure, resulting in the shrinkage of the foam product.


快三怎么玩大小单双稳赚-快三怎么推算和值大小单双-玩快三大小单双稳赚技巧From the above analysis, it can be seen that whether the soft foam has an ideal pore structure depends on whether the gel velocity and expansion velocity in the foam reaction are balanced. This balance can be achieved by adjusting the amount of tin catalyst and tertiary amine catalyst in the formulation.

快三怎么玩大小单双稳赚-快三怎么推算和值大小单双-玩快三大小单双稳赚技巧Naturally perforated foam, most of the polymer flow from the wall membrane to the rib frame. Therefore, its expansion strength, elongation, bearing capacity (i.e. foam hardness), resilience and other indicators are higher than that of closed-hole foam.



王中王最快开奖王中王-王中王马王中王资料大全-王中王资料大全枓大全特 加拿大28百分百中算法-pc加拿大28在线预测网站-加拿大28开奖结果 宝马论坛130222-宝马论坛118论坛-133222宝马论坛爆富六肖 金多宝论坛四肖八码王-金多宝高手论坛www |995澳门论坛六肖六码开奖|995澳门论坛六肖六码生肖板 133222宝马论坛爆富六肖-宝马论坛130222-宝马论坛118论坛